Canon HD Camcoder, HF G30 NOTES, NOTES, Recording Audio, Audio Recording Level, Using the WM-V1Wireless Microphone, cable. Audio output from the AV OUT and

Recording Audio

NOTES

•When using the optional SM-V1 Surround Microphone:

-Change the microphone’s directionality mode with the p>[Surround Mic Directionality] setting.

-You can enjoy the full effect of recordings made with 5.1ch surround sound on HDTVs compatible with 5.1ch surround sound connected to the camcorder using the supplied High Speed HDMI

78cable. Audio output from the AV OUT and ×(headphones) terminals will be converted to 2ch stereo. The camcorder’s built-in speaker is monaural.

Using the WM-V1 Wireless Microphone

Using the optional WM-V1 Wireless Microphone, you can reliably record sound even when recording subjects at a distance exceeding the practical range of the built-in microphone. You can also mix and record audio from the WM-V1 with audio from the built-in microphone. For details about using the WM-V1, refer to the instruction manual supplied with the microphone.

Using Commercially Available Microphones

You can also use commercially available condenser microphones with their own power supply and a cable no longer than 3 m. You can connect almost any stereo microphone with a ∅ 3.5 mm plug but audio recording levels may vary.

NOTES

• To adjust the audio recording level of an external microphone connected to the MIC terminal, refer to Audio Recording Level (A80).