Back up recordings regularly
-This message may appear when you turn on the camcorder. In the event of a malfunction, recordings may be lost so back up your recordings regularly.
Buffer overflow. Recording was stopped.
-The data transfer rate was too high for the memory card in use and the recording was stopped. Replace the memory card with one rated Speed Class 2, 4, 6 or 10.
/
- The
/
-The 
End] appears on the screen). Delete some recordings
(
53, 90) to free some space. Save your recordings ( 
111) and initialize the
memory (
38).
/
Cannot access the
- There is a problem with the
Cannot convert
- Cannot access the memory card. Check the memory card and make sure it is inserted cor- rectly.
-You inserted a MultiMedia Card (MMC) into the camcorder. Use a recommended memory card ( 
35).
-There was an error creating the file name. Set 
[Photo Numbering] to [Reset] and ini- tialize the memory card ( 
38) or delete all the photos ( 
90) and all the scenes in the
[For Web 
47).
/
Cannot copy
-The total size of the scenes you selected to copy exceeds the available space on the memory
card. Delete some recordings on the memory card ( 
53, 90) or reduce the number of scenes to copy.
-The memory card already contains the maximum number of scenes (3,999 scenes). Delete some scenes (
53) to free some space.
Cannot divide the scene. Initialize only using the camcorder.
-The scene could not be divided because the camcorder’s internal scene management data log
is full. Save your recordings ( 
111) and initialize the memory ( 
38). Then, write the video files back to the memory and divide the scene again.
Cannot edit
- Could not move a scene in the playlist. Delete some scenes from the playlist ( 
80).
Cannot enter standby mode now
-The camcorder cannot enter standby mode if the remaining battery charge is too low. Charge or replace the battery pack (
21).
154 Additional Information