No disc
-Insert a disc into the DVD burner.
-This message can appear also if condensation has formed ( 
167). Wait until the DVD burner dries completely before resuming use.
No photos
- There are no photos to add to the disc.
No scenes
- There are no scenes to add to the disc.
No scenes left to add
- There are no scenes that have not already been added to discs created previously.
Operation canceled
- The USB cable was disconnected and the operation was canceled. Check the USB connection.
Unable to recover data
-Could not recover a corrupted file. Save your recordings ( 
111) and initialize the memory
using the [Complete Initialization] option ( 
38).
Direct Print Related Messages
Data transfer error
-Cancel printing, disconnect the USB cable and turn off the printer. After a while, turn the printer back on and reconnect the USB cable.
-You attempted to print from a memory card that contains a large number of photos. Reduce the number of photos.
File error
-You attempted to print a photo that was recorded with another camcorder, has a different compression, or was edited on a computer.
Hardware error
-Cancel printing. Turn off the printer and turn it back on.
-Check the printer status.
-Ink tank errors have occurred. Replace the ink tank.
Incompatible paper size
- The paper settings of the camcorder conflict with the printer’s settings.
Ink absorber full
-Select [Continue] to resume printing. Consult a Canon Service Center (refer to the list included with the printer) to replace the ink absorber.
Ink error
-The ink level cannot be detected correctly or the ink cartridge is out of ink. Replace the ink cartridge.
Additional Information 161