Canon //Converting Only Part of a Scene or Story, •When converting scenes in a story:

NOTES

•When converting scenes in a story:

-All the scenes are merged into one converted scene.

-If the converted scene is too large, it will be split into smaller 10-minute long scenes.

-The scenes cannot be converted when their total playback time exceeds 2 hours and 30 minutes.

-If you select a music track before conversion (0133), the background music will be included in the converted scene. You can even adjust the balance between the audio levels of the original sound and the background music.

•The time required to convert scenes is approximately equal to the total playback time of the converted scenes. In most cases this is still faster than converting the scenes in the computer so we recommend you convert scenes in the camcorder.

•If you selected [End Without Connecting] in step 7 from Converting Scenes into Standard Definition from the Date Index Screen (0121), make sure you switch to a date index screen before connecting the camcorder to a computer. See 'PIXELA's VideoBrowser Software Guide' (PDF file) for details.

// Converting Only Part of a Scene or Story

1 Power the camcorder using the compact power adapter.

2Make sure there is a memory card in slot Ywith sufficient available space.

3Play back the scene or story that you want to partially convert.

Check that you have selected a scene recorded in the built-in memory or on memory card X.

4Pause the playback where you want the converted SD movie to begin.

5Press Zand continue the conversion to standard definition from step 6 in Converting Scenes into Standard Definition from the Date Index Screen (0121).

The video from the playback pause until the end of the scene/story (or up to a maximum of 10 minutes, in case of longer scenes/stories) will be converted to standard definition.

External Connections Š 123