-You inserted a MultiMedia Card (MMC) into the camcorder. Use a recommended memory card (033).

-If after the message disappears, 4/ 7appears in red, perform the following: Turn off the camcorder and remove and reinsert the memory card. If 4/ 7turns back to green you can resume recording/playback. If the problem persists, save your recordings (0114) and ini- tialize the memory card (038).

File name error

- The folder and file numbers have reached their maximum value. Set 88[Photo Num- bering] to [Reset] and delete all the photos on the memory card (0100) or initialize it (038).

Initialize only using the camcorder

- There is a problem with the file system that prevents accessing the selected memory. Initialize the memory with this camcorder (038).

LCD Screen has been dimmed

- Hold hpressed for 2 seconds to restore the LCD screen to its previous brightness set- ting.

May not be possible to record movies on this memory card

-You may not be able to record movies on a memory card without a Speed Class rating. Replace the memory card with one rated Speed Class 4, 6 or 10.

Mem. Card Number of scenes already at maximum

- The memory card already contains the maximum number of scenes (3,999 scenes); no further scenes can be copied onto the memory card. Delete some scenes (054) to free some space.

Mem. Card Unable to recognize the data

-The memory card contains scenes recorded in a different television system (NTSC). Play back the recordings in the memory card with the device originally used to record them.

Memory card A writing error Attempt recovering the data?

-

This message will appear the next time you turn on the camcorder if power supply was acci-

 

dentally interrupted while the camcorder was writing on the memory card. Select [Recover] to

 

try to recover the recordings. If you removed the memory card and used it with another device

 

after this happened, we recommend you select [No].

Memory card B writing error Attempt recovering the data?

-

This message will appear the next time you turn on the camcorder if power supply was acci-

 

dentally interrupted while the camcorder was writing on the memory card. Select [Recover] to

 

try to recover the recordings. If you removed the memory card and used it with another device

 

after this happened, we recommend you select [No].

Memory card cover is open

- After inserting a memory card, close the double memory card slot cover (035).

Additional Information Š 157