bCannot convert

- Cannot access the memory card. Check the memory card and make sure it is inserted cor- rectly.

-You inserted a MultiMedia Card (MMC) into the camcorder. Use a recommended memory card (033).

-There was an error creating the file name. Set 88[Photo Numbering] to [Reset] and initialize the memory card or delete all the photos (098) and all the scenes in the [For Web Upload] and [For DVD Burning] index screens (053).

bCannot copy

-The total size of the scenes you selected to copy exceeds the available space on the memory card. Delete some recordings on the memory card (053, 98) or reduce the number of scenes to copy.

-The memory card already contains the maximum number of scenes (3,999 scenes). Delete some scenes (053) to free some space.

Cannot divide the scene. Initialize only using the camcorder.

-The scene could not be divided because the camcorder’s internal scene management data log is full. Save your recordings (0121) and initialize the memory card (037). Write back the previously saved video file to the memory card when it is connected to the computer and try again to divide the scene on the memory card.

-Use the supplied software PIXELA ImageMixer 3 SE to save the scene and divide it on the computer.

Cannot edit

- Could not move a scene in the playlist. Delete some scenes from the playlist (091).

Cannot enter standby mode now

-The camcorder cannot enter standby mode if the remaining battery charge is too low. Charge or replace the battery pack (019).

Cannot play back

-There is a problem with the memory. If this message appears often without apparent reason, contact a Canon Service Center.

bCannot play back Cannot access the built-in memory

-There is a problem with the built-in memory. Save your recordings (0123) and initialize the built-in memory using the [Complete Initialization] option (037). If the problem persists, contact a Canon Service Center.

Cannot play back Check the memory card

-There is a problem with the memory card. Save your recordings (0123) and initialize the memory card using the [Complete Initialization] option (037). If the problem persists, use a different memory card.

bCannot play the movies in the built-in memory Initialize only using the camcorder

- The camcorder's built-in memory was initialized using a computer. Initialize the built-in memory with this camcorder (037).

Additional Information 165