- If after the message disappears, gappears in red, perform the following: Turn off the cam- corder and remove and reinsert the memory card. If gturns back to green you can resume recording/playback. If the problem persists, save your recordings (0123) and initialize the memory card (037).

Could not add the scene(s) to the playlist

-One or more scenes could not be added to the playlist. The playlist can contain a maximum of 999 scenes. If the playlist includes scenes recorded in MXP or FXP mode, the maximum num- ber of scenes in the playlist may be less than 999. Delete some scenes from the playlist (091).

Do not disconnect the USB cable or the power source until you safely end the connection from the computer. Connect the compact power adapter

-When the camcorder is in mode and is connected to the computer with the supplied USB cable, the camcorder cannot be operated. Disconnecting the USB cable or power source while this message appears may result in permanent loss of the recordings in the camcorder. Use the computer's Safely Remove Hardware function to end the connection and disconnect the USB cable before using the camcorder.

Error writing on the memory card. Data may be recovered if the memory card has not been removed. Attempt recovering the data?

- This message will appear the next time you turn on the camcorder if power supply was accidentally interrupted while the camcorder was writing on the memory card. Select [Yes] to try to recover the recordings. If you removed the memory card and used it with another device after this happened, we recommend you select [No].

File name error

- The folder and file numbers have reached their maximum value. Set 88[Photo Num- bering] to [Reset] and delete all the photos on the memory card (098) or initialize it (037).

Initialize only using the camcorder

- There is a problem with the file system that prevents accessing the selected memory. Initialize the memory with this camcorder (037).

LCD Screen has been dimmed

- Hold hpressed for 2 seconds to restore the LCD screen to its previous brightness set- ting.

May not be possible to record movies on this memory card

-You may not be able to record movies on a memory card without a Speed Class rating. Replace the memory card with one rated Speed Class 2, 4, 6 or 10.

bMem. Card Number of scenes already at maximum

- The memory card already contains the maximum number of scenes (3,999 scenes); no further scenes can be copied onto the memory card. Delete some scenes (053) to free some space.

Additional Information 167