Subject in recorded image is too bright, or image flashes white.

Subject is too close,

zShoot within correct shooting

making the flash too

distance of the subject when using

strong.

the built-in flash (p. 116).

The subject is

zSet the exposure compensation to a

overexposed because

negative (-) setting (p. 51).

the surroundings are too zUse AE lock or use the spot

dark.

metering function (pp. 48, 50).

Too much light is shining zChange the shooting angle. directly into the camera,

or is being reflected off the subject.

Flash is set to on. zSet the flash to (flash off) (Basic Guide p. 9).

Image contains noise.

ISO speed is too high. zHigher ISO speeds and the (High ISO Auto) setting may increase image noise. For higher image quality, select as low an ISO speed as possible (p. 64).

zIn , , , , , , and modes, the ISO speed increases

and noise can appear.

White dots appear on the image.

Light from the flash has zThis is a phenomenon that occurs

reflected off dust with digital cameras and does not particles or insects in the constitute a malfunction.

air. This is particularly noticeable when shooting using the wide angle.

98