Cannot transfer!

zWhen transferring images to your computer using the Direct Transfer menu, you attempted to select an image with corrupted data or an image taken with a different camera or data type. You may have also attempted to select a movie when [Wallpaper] was selected in the Direct Transfer menu.

Protected!

zYou attempted to erase or edit a protected image, movie or sound memo.

Too many marks.

zToo many images have been marked with print settings, transfer settings or slide show settings. Cannot process any more.

Cannot complete!

zCould not save the print, transfer or slide show settings.

Unselectable image.

zYou attempted to set the print settings for a non-JPEG image.

Communication error

zThe computer was unable to download the image due to the large amount of images (approx. 1000) stored on the memory card.

Lens error, restart camera

zCamera detected an error while moving the lens and cut the power automatically. This error message may appear if you press on the lens while it is moving or power up the camera in a dusty or sandy environment. Power up the camera again and shoot or playback images. Take the camera to a service center if this message appears frequently because there may be a problem with the lens.

Exx

z(xx: number) Camera detected an error. Turn the power off and then back on, then shoot or play back. A problem exists if the error code reappears. Note the number and contact your Canon Customer Support Help Desk. If an error code displays directly after taking a picture, the shot may not have been recorded. Check image in playback mode.

106