Canon JX510P manual Set the print range, Printing Only Specific Pages, Image Divisions, Стризстр

Models: JX510P

1 91
Download 91 pages 52.54 Kb
Page 28
Image 28
Image Divisions

Стризстр

If necessary, click Specify..., specify the following settings in the Poster Printing dialog box, and then click OK.

Image Divisions

Select the number of divisions (vertical x horizontal) from the Image Divisions list. As the number of divisions increases, the number of sheets used for printing increases, allowing you to create a larger poster.

Print "Cut/Paste" in margins

To leave out words "Cut" and "Paste", uncheck this check box.

Print "Cut/Paste" in marginsImportant

This feature is unavailable when the 64-bit printer driver is used.

Print "Cut/Paste" lines in margins

To leave out cut lines, uncheck this check box.

Pages

To reprint only specific pages, enter the page number you want to print. To print multiple pages, specify by separating the pages with commas or entering a hyphen between the page numbers.

Print "Cut/Paste" lines in marginsNote

You can also specify the print range by clicking the pages in the setup preview.

5.Complete the setup

Click OK on the Page Setup tab.

When you execute print, the document will be divided into several pages during printing.

After all poster pages have been printed, paste the pages together to create a poster.

Printing Only Specific Pages

If ink becomes faint or runs out during printing, you can print the pages you still need, by following the

procedure below:

1.Set the print range

In the Settings Preview on the left of the Page Setup tab, click the pages that do not need to be printed.

The pages that were clicked are deleted, and only the pages to be printed are displayed.

Page 28
Image 28
Canon JX510P Set the print range, Printing Only Specific Pages, Image Divisions, Print Cut/Paste in margins, Стризстр