Canon JX510P manual Changing the Machine Operation Mode, Transmit the settings, Custom Settings

Ccp Стризстр

On-screen Manual > Changing Machine Settings from Your Computer > Changing the Machine Operation Mode

Changing the Machine Operation Mode

This function allows you to change the machine settings, as necessary.

The procedure for configuring Custom Settings is as follows:

Custom Settings

1.Open the printer driver setup window

2.Make sure that the machine is on, and then click Custom Settings on the Maintenance tab

The Custom Settings dialog box opens.

Note

If the machine is off or bi-directional communication is disabled, a message may appear

because the computer cannot collect the machine status.

If this happens, click OK to display the most recent settings specified on your computer.

3.If necessary, complete the following setting:

Ink Drying Wait Time

You can set the length of the machine rest time until printing of the next page begins. Moving the slider to the right increases the pause time and moving the slider to the left decreases the time.

If the paper gets stained because the next page is ejected before the ink on the printed page dries, increase the ink drying wait time.

Reducing the ink drying wait time speeds up printing.

4.Transmit the settings

Click Send, and click OK when the confirmation message appears.

After that, the machine operates with the modified settings.

Page top