Remove the shipping materials from the machine.
1 Place the machine on a flat surface.
2 Remove all shipping tapes from the exterior of the machine.
3 Gently open the operation panel ➊ (it only opens partially) and remove the protective sheet ➋ from the ADF.
4 Close the operation panel by pressing at the center until it locks into place.
NOTE
• Do not remove the USB label on the back of the machine at this stage.
USB label
Assemble the machine.
1 Attach the paper loading warning label.
Paper loading warning label
5 Insert the document support into the slots on the machine.
2 Insert the
Support tray
Document support
NOTE
4 Insert the other support tray into the slots above the ADF.
3 Insert one of the support trays into the slots above the delivery slot.
• Place the