Load paper.

1 Insert a stack of paper into the multi-purpose tray ➊ (print side facing you and top edge first), then adjust the paper width guides to the width of the paper ➋.

2 Attach the multi-purpose tray cover to prevent dust accumulating inside the machine.

Multi-purpose tray cover

Paper width guide

Attach the handset cradle to the machine.

1 Insert the plugs with pins into the holes on the handset cradle.

Plug with pin

NOTE

• Do not push the pins all the way into the plugs at this stage.

 

2 Turn the machine so that the left side is facing you.

3 Insert the plugs (with the handset cradle) into the holes on the machine. 4 Carefully push the pins into the plugs as far as they will go.

NOTE

•If the pins are not pushed fully into the plugs, the handset cradle will not be securely attached to the machine.