1.2 Service Adjustment Menu Operation
To enter the service mode
To enter to the “Service Mode”, press and hold the MENU and NORMAL button on
the projector at the same time for more than 3 seconds. The service mode display
appears on the screen as follows.
To adjust service data
Select the adjustment item no. by pressing the pointer or button, and change
the data value by pressing the pointer or button. Refer to the “Service Adjustment
Data Table” for further description of adjustment item no. and data value.
To return to the normal mode
To exit the service mode, press the POWER button on the projector or remote control
unit.
Part 3: Adjustment
3-3
Service Mode
10 15
Video
Version : 1.0
Item Data
10 15
Normal mode Service mode
Adjustment
Item No. Adjustment
Data Value
Item Data
WIDE
TELE
POWER MENU
MODENORMAL
LAMP
REPLACEWARNING
TEMP. READY LAMP