Part 3: Adjustment
3-5
1.4 Service Adjustment Data TablePC CV or S Y/Cb/Cr
0 RGB AMP (Gamma OFF)
✻
30 30 0 - 63 Same as No.1of RGB AMP(Gamma ON)
1 RGB AMP (Gamma ON) 30 30 To up/down R/G/B of Gamma at same time system stop up/down, when R, G or B
value reached Max or Min value.
2 S&H Test pattern display position 3 0 - 12 Test pattern display depend on setting value,test pattern move to right, 1 dot each by
increasing data value.
3 GAMMA DLY CNT
✻
25 0 - 63 Display Green test pattern where Service No2 setting position.
4 GAMMA G BIAS 5 0 - 63
5 Not used
6 GAMMA R BIAS 5 0 - 63
7 Not used
8 GAMMA B BIAS 5 0 - 63
9 GAMMA R-B1P
✻
27 28 28 0 - 63 White balance adjustment of Black portion in AV mode for Red
10 GAMMA B-B1P
✻
27 28 28 0 - 63 White balance adjustment of Black portion in AV mode for Blue
11 GAMMA G-B1P 27 28 28 0 - 63 White balance adjustment of Black portion in AV mode for Green
12 DAC CLAMP LEVEL(SUB BRIGHT)
✻
30 30 0 - 63 Sub-Bright(refer to DAC IC Control and User control spec)
13 GAMMA R GAIN
✻
30 30 0 - 63
14 GAMMA B GAIN
✻
30 30 0 - 63
15 DAC RGB BIAS
✻
50 50 0 - 125 G-Bias adjust value(refer to DAC IC Control and User control spec)
16 DAC R BIAS
✻
50 50 50 0 - 125 R-Bias adjust value(refer to DAC IC Control and User control spec)
17 DAC B BIAS
✻
50 50 50 0 - 125 B-Bias adjust value(refer to DAC IC Control and User control spec)
18 DAC RGB GAIN(SUB CONTRAST) 20 30 0 - 63 Sub-CONT(refer to DAC IC Control and User control spec)
19 S&H B-CK 12 0 - 255 Display Blue test pattern where Service No2 setting position.
20 S&H G-CK 12 0 - 255 Display Green test pattern where Service No2 setting position.
21 S&H R-CK 12 0 - 255 Display Red test pattern where Service No2 setting position.
22 Setting for Shoot out mode 0 0 - 2 0;Normal/ 1;Shoot out1/ 2;Shoot out2
23 Serial baud rate setting 1 0 - 2 0;9600/ 1;19200/ 2;38400
24 Lamp life time display 0 Read Only
25 S&H HCK PHASE adjust 4 0 - 15 Display Green test pattern where Service No2 setting position.
26 GAMMA R_WHP 57 57 57 0 - 63
27 GAMMA G_WHP 57 57 57 0 - 63
28 GAMMA B_WHP 57 57 57 0 - 63
29 Fan Control
✻
0 0 or 1 Fans control for high land, control FAN_CONT1/FAN_CONT2.
0 : automatic, 1 : Forced High speed
30 D/A gain
✻
128 128 128 0 - 255
NTSC PAL
36 VD Analog Cont3(CV) 72 0 - 255
37 VD Analog Cont4 0 0 - 255
42 VD Bright 148 130 0 - 255
43 VD Contrast 68 68 0 - 255
64 VD Analog Cont3(S-Video) 72 0 - 255
PC Y/Cb/Cr
272 REDGAIN 96 96 0 - 255
273 GRNGAIN
✻
96 96 0 - 255
274 BLUGAIN
✻
96 96 0 - 255
275 REDOFST
✻
32 0 - 63
276 GRNOFST
✻
32 0 - 63
277 BLUOFST
✻
32 0 - 63
278 CLDUR -- -- 0 - 255
279 CLPLACE -- -- 0 - 255