CONNECTING THE PROJECTOR
TERMINALS OF THE PROJECTOR
VIDEO INPUT JACKS (VIDEO/Y, Pb/Cb, Pr/Cr)
Connect the composite video output from the video equipment to the VIDEO/Y jack or connect the component video outputs to the Y/VIDEO, Pb/Cb and Pr/Cr jacks. (Refer to P12.)
RESET BUTTON
This projector uses a micro processor to control the unit.
VIDEO | S – VIDEO |
Y – | Pb/Cb – Pr/Cr |
RESET | AUDIO OUT | AV | COMPUTER |
AUDIO
IN
CONTROL PORT
Connect the
AUDIO INPUT JACK
Connect the audio output from the video equipment to this terminal. (Refer to P12.)
Occasionally, the micro processor may malfunction and need to be reset. This can be done by pressing the RESET button with a pen, which will shut down and restart the unit. Do not use the RESET function excessively.
AUDIO OUTPUT JACK (STEREO)
Connect an external audio amplifier to this terminal.
(Refer to P12, 13.)
COMPUTER IN
COMPUTER INPUT TERMINAL
Connect the computer output to this terminal.
(Refer to P13.)
COMPUTER AUDIO INPUT JACK
Connect the audio output from the computer to this terminal. (Refer to P13.)
CONTROL PORT CONNECTOR
When controlling the computer with the Remote Control of this projector, connect the mouse port of your personal computer to this terminal.
(Refer to P13.)
COMPUTER INPUT TERMINAL
Terminal : HDB15-PIN
Connect the display output terminal of the computer to COMPUTER INPUT terminal of this projector with the VGA Cable (supplied). When connecting the Macintosh computer, the MAC Adapter (not supplied) is required.
Pin Configuration
5 | 4 | 3 | 2 |
| 1 |
| 10 | 9 | 8 | 7 | 6 |
15 | 14 | 13 | 12 |
| 11 |
1 | Red Input | 9 | No Connect |
2 | Green Input | 10 | Ground (Vert.sync.) |
3 | Blue Input | 11 | Sense 0 |
4 | Sense 2 | 12 | Sense 1 |
5 | Ground (Horiz.sync.) | 13 | Horiz. sync. |
6 | Ground (Red) | 14 | Vert. sync. |
7 | Ground (Green) | 15 | Reserved |
8 | Ground (Blue) |
|
|
CONTROL PORT CONNECTOR
Terminal : DIN 8-PIN
Connect control port (PS/2, Serial or ADB port) on your computer to this terminal with the Control Cable (the Control Cable for PS/2 port is supplied).
Pin Configuration
8 | 7 | 6 |
5 | 4 | 3 |
2 | 1 |
|
| PS/2 | Serial | ADB |
1 | R X D | ||
2 | CLK | ADB | |
3 | DATA | ||
4 | GND | GND | GND |
5 | RTS | ||
6 | T X D | ||
7 | GND | GND | |
8 | GND | GND |
11
