Setting
59

InputSourceInformationDisplay

The Information Menu is used for checking the status of the image signal being projected and the
operation of the projector.
H-syncfreq.
V-syncfreq.
Lampcounter
InformationMenu
The horizontal frequency of the input signal is
displayed in KHz, or ---- KHzwhen no signal.
The vertical frequency of the input signal is
displayed in Hz, or ----Hzwhen no signal.
Numbers of Hz doubles when during Interlace.
The cumulative lamp operating time is displayed.
Press the INFO. button on the remote controller
to display the Information Menu.
INFO.button

Remotecontroller

Press the Point ▲▼ buttons to select the
Information. The Information Menu is displayed.
See below for displayed information.
Powermanagementmode
Aspect
Off, Standby or Exit, and Timer are displayed.
The selected Screen size is displayed.
Input
Lampstatus
The selected input source is displayed.
The selected lamp mode is displayed.
Language
The selected language is displayed.
Keylock
The selected Key lock icon is displayed.
PINcodelock
Off or On 1 or On 2 is displayed.
Remotecontrol
The selected remote code is displayed.
Direct Operation
Menu Operation
SERIALNO.
The serial number of the projector is displayed.
The serial number is used to service the
projector.
Information
Totalpowersavings
The saved amount of power and the exhausted
CO2 are displayed.