ComputerInput
33
ComputerInput
Store
To store the adjusted data, selectStoreand
then press the Point ► button or the OK button.
Move the highlight to one of the Modes 1 to 10
in which you want to store, and then press the
OK button.
Modefree
To clear the stored data, select Modefree and
then press the Point ► button or the OK button.
Move the highlight to the Mode that you want to
clear and then press the OK button.
Note:
• Displayarea(H/V)cannot be selected when 480i, 575i, 480p, 575p, 720p, 1035i or 1080i is selected in the
PC System Menu (p.30).
• When input computer signal to the projector,PCadjustwill become available.
Reset
To reset the adjusted data, select Reset and
press the OK button. A confirmation box appears
and then select Yes. All adjustments will return
to their previous figures.
This Mode has stored
parameters.
Values of Totaldots, Horizontal
position, Verticalposition, Displayarea
H, and DisplayareaV.
Vacant
Press the OK button to
store the data.
Press MENU
button to close this
dialog box.
Modefree
Store