ComputerInput
31
ComputerInput
Auto PC Adjustment function is provided to automatically adjust Finesync, Totaldots, Horizontal
position and Vertical position to conform to your computer.
PCadjustMenu

AutoPCAdjustment

Tostoreadjustmentparameters
The adjusted parameters from the Auto PC
Adjustment can be stored in the projector.
Once the parameters are stored, the setting
can be done just by selecting a Mode(1–10) in
the PC System Menu (p.30). See also “Store”
on page 33.
Note:
• Finesync, Totaldots, Horizontalposition and
Vertical position of some computers cannot be
fully adjusted with the Auto PC Adjustment function.
When the image is not provided properly with this
operation, manual adjustments are required (pp.
32-33).
• The Auto PC Adjustment cannot be operated when
480i, 575i, 480p, 575p, 720p, 1035i or 1080i is
selected in the PC System Menu (p. 30).
Press the MENU button to display the
On-Screen Menu. Use the Point ▲▼
buttons to select PCadjust and then press
the Point ► button or the OK button.
1
2Use the Point ▲▼ buttons to select Auto
PC and then press the OK button.
AutoPC
Menu Operation
Use Point ▲▼ buttons to select Auto
PC and press the OK button. Please
wait... appears while the Auto PC
adjustment is in process.