BasicOperation
29
Choose either COMPUTER1(ANALOGPC)or COMPUTER2(ANALOGPC) by pressing the
COMPUTER 1 or COMPUTER 2 button on the remote controller.
Before using these buttons, correct input source should be selected through Menu operation as
described below.
1InputMenu
2
3
Note:
When the Auto input function is set to On 1 or On
2 in the Auto setup function, the input signal will
be searched automatically (p.47).
COMPUTER 1
Remotecontroller
Press the MENU button to display the
On-Screen Menu. Use the Point ▲▼
buttons to select Input and then press the
Point ► button or the OK button.
Use the Point ▲▼ buttons to select
COMPUTER 1.
When COMPUTER 1 is selected, press
the Point ► button to access the submenu
items. Use the Point ▲▼ buttons to select
the ANALOGPCinput source and then
press the OK button.
COMPUTER1(SCART)

InputSourceSelection(ANALOGPC:COMPUTER1/COMPUTER2)

COMPUTER2(ANALOGPC)
Direct Operation
Menu Operation
ComputerInput

OR

Use the Point ▲▼ buttons to select
COMPUTER 2 and then press the OK
button.
COMPUTER1button
COMPUTER2button
COMPUTER1(ANALOGPC)
INPUTbutton
TopControl