8
9
Close the printer cover and lower the scanning platform.
CAUTION
Be careful not to get your fingers caught.
Reconnect the power cord and turn on the main power switch.
Fuser Roller
If black streaks appear with printing, the fuser roller in the main unit may be dirty. Should this occur, clean the fusing roller in the following procedure. The roller should also be cleaned each time the toner cartridge is replaced. Load a sheet of blank LTR paper into the
NOTE
Cleaning the roller takes approximately 130 seconds.
1 Press [Additional Functions].
2 Press [
] or [
] to select <ADJUST./CLEANING>, then press [OK].
3 Load a sheet of blank LTR paper in the
Maintenance