Canon MP499 manual Step Ten 10-A, Installing the Drivers & Software, Previous, Next, Click Connect

Installing the Drivers & Software

<< Previous Next >>

Step Ten 10-A

If the Detected Access Points List screen appears: If the screen below does not appear, perform 10-B.

1.Select the target access point name/network name (SSID).

2.Enter the network key.

Enter upper and lower case letters of the alphabet correctly. Letters are case sensitive.

To use WEP key number 2, 3 or 4, click WEP Key Number, then specify the WEP key number.

3. Click Connect

Go to Step Eleven.

Note:

If the target access point is not displayed on the Detected Access Points List or Access Points screen, refer to the printed manual: Network Setup Troubleshooting.

For details on how to check the access point name/network name (SSID) and network key, refer to the manual supplied with your access point or contact its manufacturer.

11