?There’s no picture on the TV screen.
?There’s no picture on the TV screen, even though the tape is moving.
?There’s no sound coming from the speaker during playback.
•AV/PHONES is not set to AV in the menu ( 
32).
•AV \ DV OUT 
83).
•The video heads need cleaning ( 
103).
•The TV/VIDEO selector on the TV isn’t set to VIDEO ( 
•The speaker has been turned off with the selector dial ( 
31).
•Headphones are being used.
E
Miscellaneous
Problem
?The wireless controller doesn’t work.
?The power indicator is flashing.
?The camcorder malfunctions.
?The DV cable is connected correctly, but there’s nothing in the display.
?The camcorder becomes warm during use.
Cause and/or what to do about it
•The remote sensor mode is set to OFFB in the menu ( 
44).
•The remote sensor modes of the wireless controller and the camcorder itself are different ( 
44).
•The batteries are dead or not inserted.
•Check the screen displays ( 
111).
•External interference may cause the camcorder’s microprocessor to malfunction temporarily. If random letters appear in the display or if normal operation is interrupted, remove and then replace the power source.
•Remove the cable and then reconnect it or turn the power off and back on again.
•This is not a malfunction.
Information | Additional |
