Canon MV880xi instruction manual Editing, Tape

Playback

Problem			Cause		Solution
Pressing the playback button	Camcorder is turned off, or is			Set the camcorder to PLAY			30
does not start playback.	not set to PLAY (VCR) mode.			(VCR) mode.
	The TAPE/CARD switch is set			Set the TAPE/CARD switch to			30
	to CARD.			TAPE.
	Cassette is not loaded.			Load a cassette.			14
	Tape reached the end			Rewind the tape.			30
	(“	END” flashes on the
	screen).
Image will not appear on the	[AV		DV] is set to [ON].	Set [AV		DV] to [OFF].	80
TV screen.
Tape is running, but image will	TV/VIDEO selector on the TV			Set the selector to VIDEO.			33
not appear on the TV screen.	is not set to VIDEO.
	Video heads are dirty.			Clean the video heads.			131
	You attempted to play back or			Stop playback/dubbing.				–
	dub copyright protected tape.
No sound from the built-in	Speaker volume is turned off.			Adjust the volume with the			32
speaker.				SET dial.

Editing

Problem		Cause		Solution
Dubbing via the camcorder’s	[AV	DV] is set to [ON].	Set [AV		DV] to [OFF].	80
DV terminal does not work.
	Wrong signal format.		Dubbing may work via the AV				–
			terminal.
			Refer also to the instruction
			manual of the connected
			device.

138