Battery Pack Handling Precautions

DANGER!

Treat the battery pack with care.

Keep it away from fire (or it might explode).

Do not expose the battery pack to temperature higher than 60 ºC. Do not leave it near a heater or inside a car in hot weather.

Do not try to disassemble or modify it.

Do not drop or knock it.

Do not get it wet.

Charged battery packs continue to discharge naturally. Therefore, charge them on the day of use, or the day before, to ensure a full charge.

Attach the terminal cover whenever a battery pack is not in use. Contact to metallic objects may cause a short circuit and damage the battery pack.

Dirty terminals may cause a poor contact between the battery pack and the camcorder. Wipe the terminals with a soft cloth.

Since storing a charged battery pack for a long time (about 1 year) can shorten its lifecycle or affect performance, we recommend to discharge the battery pack fully and to store it in a dry place at temperatures no higher than 30 ˚C. If you do not use the battery pack for long periods, charge and discharge it fully at least once a year. If you have more than 1 battery pack, perform these precautions at the same time for all battery packs.

Although the battery pack’s operating temperature range is from 0 ˚C to 40 ˚C, the optimal range is from 10 ˚C to 30 ˚C. At cold temperatures, performance will temporarily decline. Warm it in your pocket before use.

Replace the battery pack if the usable time after full charge diminishes substantially at normal temperatures.

E

About the battery terminal cover

The battery terminal cover has a [ ]-shaped hole. This is useful when you wish to differentiate between charged and uncharged battery packs. For example, with charged battery packs, attach the terminal cover so that the [ ]-shaped hole shows the blue label.

Back side of the battery pack

Terminal cover attached

 

 

Charged

Uncharged

B

 

 

D

 

Additional Information

137

Page 137
Image 137
Canon MV 690 instruction manual Battery Pack Handling Precautions, About the battery terminal cover