
❍ To use the 57), press the
❍When the subject is too bright (overexposed), use the optional
❍When the Focus-Priority mode is set to [ON]:
When you press the PHOTO button fully before F and focusing frame turn
green, it may take up to 2* seconds until focus is adjusted and the still image can be recorded to the memory card.
* Up to 4 seconds in the Low Light and the Night modes.
If the subject is not suitable for autofocus, the focusing frame turns yellow and locks the focus. Adjust the focus manually with the SET dial.
❍When the
In step 2, F turns green, and focus and exposure are locked.
❍The camcorder shuts off when you do not operate it for 5 minutes to save power. “ AUTO POWER OFF” appears 20 seconds before shutoff. To continue recording, turn the POWER switch to OFF and then back to CAMERA.
Recording a Still Image on a Memory Card While Recording Movies on a Tape
When you are recording a movie on a tape, you can record the same picture as a still
image on the memory card.
E
CAMERA | PLAY (VCR) |
|
| CARD CAMERA | CARD PLAY | ||
|
|
|
|
|
| ||
|
|
|
|
|
| ||
| CAMERA SETUP |
|
| PHOTO REC••••TAPEb |
( | 38) |
1.Open the menu and select [CAMERA SETUP]. Select [PHOTO REC], set it to [CARD] and close the menu.
2.While you are recording a movie, press the PHOTO button.
❍The size of the still image will be 640 ⋅ 480.
❍ The quality of the still image is slightly lower than a still image recorded in CARD CAMERA mode.
❍The still image cannot be recorded on a memory card when a fader, effect or the
❍The still image cannot be recorded on a memory card when the 16:9 format is selected.
❍Card mix cannot be used.
Using a Memory Card
97