E

Mastering the Basics

•Bright light falling on the LCD screen may cause glare that makes it difficult for you to view the image. In this case, switch to using the viewfinder. You can also adjust the brightness of the screen (see “Adjusting the LCD screen” below).

Adjusting the LCD Screen

You can adjust the brightness of the LCD screen.

TAPE + CAMERA , TAPE +

PLAY

, CARD + CAMERA ,

CARD +

PLAY

(VCR)

(VCR)

DISP.SET UP

 

BRIGHTNESS••–

+

 

 

( 38)

 

 

 

 

 

Open the menu and select DISP.SET UP from the menu. Then select BRIGHTNESS, adjust the level with the selector dial and close the menu.

A bar showing the level appears in the display.

•Turn the selector dial up to make the display brighter.

•Turn the selector dial down to make the display darker.

Notes:

•The camcorder retains your brightness setting even after you turn it off.

•The brightness of the LCD does not affect that of the recorded images or the viewfinder.

About the LCD Screen

The LCD screen built into this camcorder is a high precision product. However, small black dots or bright points of light (red, blue or green) may appear constantly on the LCD screen. This is not a malfunction of the LCD screen and they are not recorded. (Effective dots: more than 99.99%)

26