Searching and Reviewing While RecordingRecord Search

When the camcorder is in record

 

pause mode, you can use record

 

search to play the tape forwards or

 

backwards to locate the point where

REC SEARCH

you wish to start or resume

 

recording. This is useful when you

 

wish to add a new scene to a

 

previously used cassette. By using

 

record search, you can ensure a

 

smooth, noise-free join between the

 

new scene and the old one.

 

TAPE + CAMERA

1.Press and hold the REC SEARCH + or – button on the camcorder while you check the picture in the display.

•The + button plays the recording forwards and the – button plays it backwards.

2.Release the button at the point you wish to start recording.

•The camcorder returns to record pause mode.

Record Review

When the camcorder is in record pause mode, you can use record review to play back the last few seconds of your recording and then return automatically to record pause mode. You can quickly check if a scene has been recorded properly and then go on to shoot the next scene, without producing any noise in the picture.

TAPE + CAMERA

1.Press and release the c (record review) button while you check the picture in the display.

•The camcorder rewinds the tape, plays back the last few seconds, and returns to record pause mode.

Note:

• Noise may appear on the screen when you play the tape backwards.

E

Full the Using Features of Range

37