Canon MVX300, MVX350i, MVX330i instruction manual Memory Card Operation, Printing

Memory Card Operation

	Problem	Cause	Solution
Memory card cannot be		Memory card was not facing	Turn the memory card over	90
inserted.		the correct direction.	and reinsert it.
Memory card cannot be		Memory card is full.	Replace the memory card or	90
recorded.			erase images.
		Memory card is not formatted.	Format the memory card.	117
		Memory card is not inserted.	Insert a memory card.	90
		File number reached	Set [FILE NOS.] to [RESET]	93
		maximum value.	in the menu and insert a new
			memory card.
		SD Memory Card is	Change the position of the	90
		protected.	protect switch.
Memory card cannot be		Camcorder is not set to	Set the camcorder to CARD	109
played back.		CARD PLAY mode.	PLAY mode.
		Memory card is not inserted.	Insert a memory card.	90
Image cannot be erased.		Image is protected.	Cancel the protection.	111
		SD memory card is protected.	Change the position of the	90
			protect switch.
“	” flashes red.	Card error occurred.	Turn off the camcorder.	117
			Remove and reinsert the
			memory card. Format the
			memory card if flashing
			persists.

E

Printing

Problem	Cause		Solution
The printer is not operating	The camcorder is set to	1.	Set the camcorder to	–
even though camcorder and	NETWORK mode.		CARD PLAY mode.
printer are correctly		2.	Disconnect and reconnect
connected.			the USB cable.
		3.	Turn off the printer and turn
			it back on.

Information Additional

153