34
CD E
□ Turning the power off
Be sure to follow the procedure below.
1.Press the ON button (A) to turn off the machine.
2.Make sure that the lamp (B) of the ON button is not lit.
1 | A | B | 2 |
|
|
Operating noise may continue for up to 25 seconds until the machine turns off.
Use the [ or ] button (C) on the Operation Panel to select the language for the LCD (Liquid Crystal Display) (D), then press the OK button.
Make sure that the above screen is displayed and go to the next step.
•If an unintended language is displayed on the LCD, press the Back button (E) to return to the
Language selection screen.
•When removing the power plug, make sure that the lamp of the ON button is not lit before removing the plug.
Removing the power plug while the lamp of the ON button lights up or flashes may cause drying and clogging of the FINE
Cartridges, resulting in poor printing.
If your machine is used as fax
•Removing the power plug deletes all faxes stored in memory. Send or print faxes as necessary before removing the power plug.
10 | 4 Turn the Power On |