Canon PIXMA manual Select Use the printer on network, then click Next, appears, click Next, Step

Models: PIXMA

1 13

Page 8

Installing The MG8120 Software

	<< Previous			Next >>

Step 5	Step 6
Select Use the printer on network,	When the Printer Detection screen
then click Next.	appears, click Next.

IMPORTANT

IF THE PRINTER CONNECTION SCREEN APPEARS INSTEAD OF THESCREEN ABOVE, THE CONNECTION METHOD IS NOT CORRECTLY

SELECTED IN 5.

CLICK CANCEL AND START AGAIN FROM STEP 1, THEN BE SURE TOSELECT USE THE PRINTER ON NETWORK IN 5.

Image 8

Contents

PIXMA MG8120 Installing Your Multifunction to Additional Computers on Your NetworkNext Mac OSPrevious NextInstalling Your Multifunction to Additional Computers on Your Network PIXMA MG8120Preparing to Connect My Multifunction To My Network PreviousNext Network RequirementsIn an office setup, consult your network administrator Preparing to Connect My Multifunction To My NetworkPrevious NextInstalling The MG8120 Software Enter your administrator name and password, then click OK StepInstalling The MG8120 Software StepClick Easy Install Click InstallInstalling The MG8120 Software StepWhen the Printer Detection screen Select Use the printer on networkthen click Next appears, click NextWhen the Register Printer and On the Canon IJ Network Tool screenselect MG8100 series in Printers, then Scanner screen appears, click1. When the Printer List window For OS X v. 10.6.x and 10.5.x onlyFor OS X v. 10.4.11 only Select Canon MG8100 seriesStep 10 continued 2. Click More Printers in the Printer3. Click More Printers in the Printer Browser windowWhen the Register Printer and from-Operation-Panel SettingsRegister Scanner screen, then click OKinstallation Click Next on the Register Printer andFollow any on-screen instructions to Scanner screen