- Logic board ass'y (QM2-
2745)*1
- Paper feed motor (QK1-
1502)
4 times Purge cam sensor error
[5C00] An error occurred in the purge unit. - Purge unit (QM2-2299)
- Logic board ass'y (QM2-
2745)*1
5 times ASF (cam) sensor error
[5700] This error takes place when feeding paper
from the ASF after an error occurred in the
ASF cam sensor.
- Sheet feed unit (QM2-
2312)
6 times Internal temperature error
[5400] The internal temperature is not proper. - Logic board ass'y (QM2-
2745)*1
7 times Waste ink absorber full
[5B00] The waste ink absorber is full. - Ink absorber kit (QY5-
0147)
8 times Print head temperature rise
error [5200] The print head temperature exceeded the
specified value.
- Print head (QY6-0063)
- Logic board ass'y (QM2-
2745)*1
9 times EEPROM error [6800] A problem occurred in writing to the
EEPROM.
- Logic board ass'y (QM2-
2745)*1
11 times Carriage lift mechanism
error [5110] The carriage did not move up or down
properly.
- PR lift shaft ass'y (QL2-
0936)
- Sheet feed unit (QM2-
2312)
- Logic board ass'y (QM2-
2745)*1
- Carriage lift sensor unit
(QM2-2678)
12 times AP position error [6A00] An error occurred in the AP motor during
purging operation.
- Sheet feed unit (QM2-
2312)
- Logic board ass'y (QM2-
2745)*1
- Purge unit (QM2-2208)
13 times Paper feed position error
[6B00] An error occurred in the paper feed motor. - Sheet feed unit (QM2-
2312)
- Logic board ass'y (QM2-
2745)*1
14 times Paper feed cam sensor error
[6B10] An error occurred in the paper feed cam sensor
during paper feeding from the front paper feed
cassette.
This error is also indicated when the waste ink
counter is 60% or more, and a paper jam
occurs.
- Sheet feed unit (QM2-
2312)
- Logic board ass'y (QM2-
2745)*1
15 times USB Host VBUS
overcurrent [9000] The USB Host VBUS is overloaded. - Logic board ass'y (QM2-
2745)*1
16 times Valve sensor error [6C00] An error occurred in the valve sensor during
cleaning.
- Logic board ass'y (QM2-
2745)*1
- Purge unit (QM2-2208)
17 times Motor driver error [6D00] The AD conversion value indicating the motor
driver temperature is not proper.
- Logic board ass'y (QM2-
2745)*1
19 times Ink tank position sensor
error [6502]
None of the ink tank position is detected. - Platen unit (QM2-2313)
- Logic board ass'y (QM2-
2745)*1
20 times Other hardware error [6500] The PCI bus error is detected by the ASIC. - Logic board ass'y (QM2-
2745)*1
Continuous ROM error The check sum value is incorrect in the ROM - Logic board ass'y (QM2-
1-8