Shooting – The Basics

z For good results, pan (swivel) the camera to take successive shots.

z To shoot close-ups, slide the camera over the subject, keeping it parallel to the subject as you move it.

ShootingImages can be shot in the following 2 sequences in Stitch Assist mode.

Left Right Left to right horizontally

Left Right Right to left horizontally

1Turn the Shooting mode dial to

.

z The LCD monitor will turn on.

2Select the shooting sequence using the left or right button and press

the SET button.

z The shooting sequence is set.

zYou can also press the shutter button directly to shoot without pressing the SET button.

3Shoot the first image.

z The exposure and white balance settings are set and locked with the first image.

4Compose and shoot the second image so that itoverlaps the first.

z Minor discrepancies in

the overlap can be

corrected with the Sequence software.

z An image can be retaken. Press the left or right button to return to that frame.

5Use the same procedures toshoot the remaining frames.

z A maximum of 26 images can be recorded.

6Press the SET button after the last shot.

50