Canon Direct Printing with CP Printers

2a Trim the image.

Changing the Size of the Trimming Frame

z Press the zoom lever or the zoom button to adjust the size of the trimming frame.

z The trimming frame can be changed to a minimum selection of approximately half the displayed image or a maximum selection that is virtually the same size as the image.

z Expanding the trimming frame beyond its maximum size cancels the trimming setting.

z When printing an image that has been magnified using the trimming option, the image quality may become coarser and grainier depending on the level of magnification. If this happens, the trimming frame displays in red.

Moving the Trimming Frame

z Move the trimming frame using the multicontroller or the up, down, right and left buttons.

Rotating the Trimming Frame

z You can rotate the trimming frame by pressing the DISP. button or the DISPLAY button.

3a

2b

Press the SET button to close the setting menu.

Pressing the MENU button cancels the settings.

Trim the image.

Changing the Size of the Trimming Frame

z Press the up and down buttons to adjust the size of the trimming frame.

z The trimming frame can be changed to a minimum selection of approximately half the displayed image or a maximum selection that is virtually the same size as the image.

z Expanding the trimming frame beyond its maximum size cancels the trimming setting.

z When printing an image that has been magnified using the trimming option, the image quality may become coarser and grainier depending on the level of magnification. If this happens, the trimming frame displays in red.

Rotating the Trimming Frame

z You can rotate the trimming frame using the left and right buttons.

Moving the Trimming Frame

z Press the SET button and use the up, down, right and left buttons to move the trimming frame. Pressing the SET button again allows you to change the size of the frame and to rotate it.

3b Press the MENU button, select [OK] and press the SET button.

Selecting [Cancel setting] cancels the selected trimming setting. If [Edit] is selected, the display returns to the previous screen.

9