Canon Printing Using a Direct Camera/Printer Connection Guide Direct Print manual 23

PictBridge Printing with Bubble Jet Printers

List of Messages

The following messages may appear on the camera LCD monitor if an error occurs during a camera and Bubble Jet printer connection. (Depending on the Bubble Jet printer, some messages may not appear.)

z Please refer to the Bubble Jet printer’s user guide for the appropriate remedies.

: Printing restarts if you select [Continue] and press the SET button. For the remedies to other messages that might appear, refer to your Bubble Jet printer’s user guide.

	There is no paper in the auto sheet feeder. In the case of a Bubble
No Paper	Jet printer equipped with a photo paper cassette, the cassette may
	be incorrectly inserted or out of paper.
Paper Jam	The paper jammed during printing.
Paper Error	The paper is not correctly set in the printer.
No Ink	The ink tank has run out of ink.
Low ink level	The ink tank needs to be replaced soon. Prepare a new ink tank. If
	you select [Continue] in the error screen, you can restart printing.
	You can restart printing by pressing the RESUME/CANCEL button
	on Bubble Jet Printer. Please request replacement of the waste
Waste tank full	tank to the shop where you purchased the printer or your nearest
	Canon Customer Support center listed in the Contact List provided
	with the Bubble Jet Printer or in the Bubble Jet user guide.
Ink Error	Check the level of the printer’s ink and the condition of the waste
	tank.
	Turn off the printer, then turn it on again. If the error persists, please
Printer error	consult the dealer where you purchased your printer or your nearest
	Canon Customer Support center (listed in the Contact List provided
	with the Bubble Jet Printer).
	The printer is printing the data from the memory card inserted in the
Printer in use	computer or printer. The printer automatically starts printing the
	images from the camera after completing the current printing.
Paper lever error	Adjust the paper thickness lever to the proper position.
Printer cover open	Close the printer cover securely.
No print head	No print head is installed in the printer.
Hardware Error	Check whether or not an error other than a paper or ink error has
	occurred. Also check the printer’s battery charge.
	You tried to print an image that is not compatible with PictBridge.
File Error	Some images that have been recorded with another camera or
	modified using a computer cannot be printed.

21