a

b

Indicator

aSelect [OK] using the W or X arrow on the omni selector, then press the SET button.

The indicator blinks red and formatting starts. Wait until the indicator goes off.

zTo cancel instead of erasing, select [Cancel] and press the SET button.

bPress the MENU button.

Turning the Power On/Off

The power/mode indicator remains lit while the power of the camera is on. The power/mode indicator indicates the state of the camera as follows.

Orange:Shooting mode

Green: Playback mode/Printer connection mode*

Yellow: Computer connection mode*

Off:

The power of the camera is off.

*For printer connection mode, see the Direct Print User Guide. For computer connection mode, see the Software Starter Guide.

ŠYou will hear a start-up sound and see the startup image when the power comes on (p. 111).

ŠThe start-up image does not appear when the viewfinder display is on in Shooting mode or the A/V OUT terminal is connected to a TV.

ŠBe careful not to touch the lens when shooting. Please also refrain from forcing the lens with fingers or other objects. It could lead to malfunctions or damage the camera. If this occurs, turn the camera off and back on.

Turning on the camera without the start-up sound and image

Press and hold the button, then turn on the power. You can also turn the power on with the LCD monitor closed.

1. Preparing the Camera 19