Using the Self-Timer1.Press the 
button (a) and use the 
or 
button (b) to display 
, 
or 
.•You can also use the touch control dial to make a selection.
•When the shutter button is pressed fully, the self-timer will activate and the self-timer lamp will blink (when using red-eye reduction, it will stay lit for the last 2 seconds).
•You can change the delay time and number of shots with the 
option (p. 17).
To Cancel: press the 
button and use the 
or 
button to select 
.
a
b
10 sec. Self-Timer: shoots 10 sec. after you press the shutter button.• 2 sec. before the shutter releases, the self-timer lamp and sound speed up*1.
2 sec. Self-Timer: shoots 2 sec. after you press the shutter button.• The self-timer sound beeps quickly*1 when you press the shutter button and the shutter releases 2 sec. later.
Custom Timer: you can change the delay time (0–10*2, 15, 20, 30 sec.) and number of shots (1–10)*3.
• When [Delay] is set to 2 or more sec., the self-timer sound beeps quickly 2 sec. before the shutter releases. When [Shots] is set to more than 1, the self-timer sound only beeps before the first shot.
*1 This may differ depending on your My Camera settings (Advanced Guide p. 113). *2 Default setting.
*3 Default setting is 3 shots.
The self-timer cannot be used in some shooting modes.
See the Advanced Guide: Functions Available in Each Shooting Mode (p. 160).
Î 
See Selecting a Shooting Mode (p. 11).