Checking the Focus
You can magnify the area of a recorded image that was inside the AF Frame, or the area of a face that was detected, to check the focus.
Press the lbutton, and switch to the focus check display (p. 45).
●For images with detected faces, you can
also switch to the focus check display by pressing the 0 button.
XA white frame will appear where the AF frame or face was when the focus was set.
XA gray frame will appear on a face detected during playback.
XThe area within the orange frame appears magnified.
Switch frames.
●Move the zoom lever toward konce. XThe screen shown to the left will appear.
●Press the 0 button to switch between frames of detected faces.
●Press the m button to switch between frames other than those of detected faces.
Change the magnification level or location.
●Use the zoom lever to change the display size, and the opqrbuttons to change the display position while checking the focus.
●Pressing the nbutton resets the display to Step 1.
103