Changing Shooting Functions
Displaying the OverlayYou can display gridlines for vertical and horizontal guidance, or a 3:2 guide to confirm the printable area for postcard size prints.
●Choose [Disp. Overlay], then press the qr buttons to choose an option.
Grid Lines | A grid overlays the display. | |
|
| |
| The areas outside the 3:2 range are | |
3:2 Guide | grayed out. This area will not print | |
when printing on paper with a 3:2 | ||
| ||
| aspect ratio. | |
|
| |
Both | Both grid lines, and the 3:2 guide will | |
display. | ||
|
• In 
mode, you cannot set [3:2 Guide] or [Both].
• Grid Lines will not be recorded on the image.
•The gray areas displayed with [3:2 Guide] are the areas that will not be printed. The actual image recorded will include the portion in the gray areas.
Changing the
●Choose [IS Mode], then press the qr buttons to choose an option.
Image stabilization is always on. You can
Continuous confirm the result directly on the display, which makes it easier to check the
composition or focus.
Shoot Only Image stabilization is only active at the moment of shooting.
Image stabilization only counters up and
Panning down motion. This option is recommended for shooting objects
moving horizontally.
•If camera shake is too strong, attach the camera to a tripod. It is
recommended to set the IS Mode to [Off] when the camera is attached to a tripod.
•When using [Panning], hold the camera horizontally. Image stabilization does not work when the camera is held vertically.
121