1-22

▼HTTP Upload

1Notification
Select information to be notified from “Notification Only with HTTP” or “Image attached
Notification with HTTP”.
2URI
Enter the URI for upload (using up to 255 characters).
3User Name, Password
Enter the user name and password required for authentication.
4Proxy Server
Enter the proxy server’s host name or IP address (using up to 63 characters).
5Proxy Port
Enter the proxy server’s port number (The default port number is “80”).
6Proxy User Name, Proxy Password
Enter the proxy server’s user name and password.
7Parameter (query string)
Enter the URI parameters (using up to 127 characters) using interpreted sequences (%)
(➞ P.5-2).
8HTTP Upload Test
Click “Exec” to perform a HTTP to check if HTTP upload is properly carried out according to
your settings.

Set HTTP Upload, FTP Upload and E-mail Notification (Upload)

2
1
3
4
5
6
7
8
- Set “Disable” for either of “ON Event Operation” or “OFF Event Operation”,
when “External Device Input Event” is set to “Enable” (➞ P. 1-32).
- Select a longer interval for “Interval of the Timer”, when “Interval Timer Event”
is set to “Enable” (➞ P.1-33).
• Reduce the frequency of e-mail notification
- Set “Disable” for any one of “ON Event Operation”, “OFF Event Operation”, or
“Continuous Motion Operation”, when “Motion Detection Event” is set to “Enable”
(➞ P.1-30).
- Set “Disable” for either of “ON Event Operation” or “OFF Event Operation”,
when “External Device Input Event” is set to “Enable” (➞ P. 1-32).
- Select a longer interval for “Interval of the Timer”, when “Interval Timer Event”
is set to “Enable” (➞ P.1-33).