Detail Settings
3
Detail Settings
38
Ethernet
“Use Ethernet”
Tick this check box to use Ethernet.
“Address Setting Method”
In “Address Setting Method”, select “Auto
Setting (DHCP)” or “Manual Setting”. If
you select “Manual Setting”, specify the
settings in “IP Address” and “Subnet
Mask”.
“IP Address”
Enter a network interface-specific IP
address.
“Subnet Mask”
Enter the subnet mask specified for the
network to be connected.
“Use Port Authentication (EAP-MD5)”
Tick this check box when using the
switching HUB and you wish to use the
IEEE802.1x authentication function. Once
ticked, specify the settings in “User Name”
and “Password” to be used for
authentication.
●Be sure to specify the gateway address in
the Default Route field (→ P. 41).
●Contact the network administrator for the
IP address, subnet mask, and default
gateway address settings.
Network Settings Page
Use this page to specify the settings for connecting to an Ethernet, Wireless LAN, PPP or PPPoE
network. For a LAN connection, specify Ethernet settings and for a wireless LAN
connection, specify wireless LAN settings. For connection made with a modem, specify
PPP or PPPoE settings.
c
Note
●If you are using Ethernet, take particular care with the IP address, subnet mask and
route settings. If errors are found in any of these items, you may be completely
unable to access the VB150 via Ethernet and it may only be possible to recover the
problem by using the Initial Setup Tool (→ P.30) to correct the error.
●When you change an IP address, please re-access the Settings Title Page
with the new IP address (→ P.35).