If

continues to flash (for more than 1 minute) or if

or

does not

appear, the camcorder is not correctly connected to the printer. In such case,

disconnect the cable from camcorder and printer, turn off camcorder and printer,

 

 

turn both back on and reconnect the camcorder to the printer.

 

E

 

 

 

 

 

 

 

 

 

 

 

 

Refer to the instruction manual of each printer for information on which interface cable to use with the camcorder.

We recommend powering the camcorder from a household power source.

Refer also to the instruction manual of the respective printer.

The print setting menu may differ slightly depending on the connected printer.

Printing after Selecting the Print Settings

You can select the number of copies and other settings for printing. The setting options vary depending on your printer model.

CAMERA

PLAY (VCR)

CARD CAMERA

CARD PLAY

1. Press the SET dial.

• The print setting menu appears.

• Depending on the printer, the message “BUSY.” may appear before the camcorder displays the print setting menu.

2.Select the print settings ( 115).3.Turn the SET dial to select [PRINT] and press the SET dial.

•Printing starts. The print setting menu disappears when printing is complete.

•If you wish to continue printing, select another still image with the CARD +/– button.

Observe the following precautions during printing, otherwise printing may not be performed correctly.

-Do not turn off the camcorder or the printer.

-Do not change the position of the TAPE/CARD switch.

-Do not detach the cable.

-Do not open the memory card cover or remove the memory card.

Images not recorded with this camcorder, uploaded from a computer, edited on a computer and images whose file names have been changed may not be printed correctly.

If the message “BUSY.” does not disappear, disconnect the cable from camcorder and printer and reconnect the camcorder to the printer.

Cancel Printing

Press the SET dial during printing. A confirmation dialog appears. Select [OK] and press the SET dial.

Printing Errors

If an error occurs during the printing process, an error message appears ( 129).

-Resolve the error. When printing does not resume automatically, select [CONTINUE] and press the SET dial. If [CONTINUE] cannot be selected, select [STOP], press the SET dial and retry printing. Refer also to the printer manual for details.

Printing Direct

113