1 Preparing the battery pack
For customers in the USA and Canada
Plug
For customers in countries/regions other than the USA and Canada
| CHARGE lamp |
CHARGE lamp | Power cord (mains lead) |
|
1Insert the battery pack into the battery charger.
2Connect the battery charger to the wall outlet (wall socket).
The CHARGE lamp lights up, and charging starts.
When the CHARGE lamp turns off, charging is finished (Normal charge).
If you continue charging the battery pack for about one more hour (until it is fully charged), the charge will last slightly longer.
[ Charging time
Full charge time | Normal charge time |
Approx. 330 min. | Approx. 270 min. |
|
|
•The table above shows the time required to charge a fully depleted battery pack at a temperature of 25 °C (77 °F). Charging may take longer depending on conditions of use and circumstances.
•See page 31 for the number of images that can be recorded.
•Connect the battery charger to the nearest wall outlet (wall socket).
•Even if the CHARGE lamp is not lit, the battery charger is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet (wall socket). If some trouble occurs while using the battery charger, immediately shut off the power by disconnecting the plug from the wall outlet (wall socket).
•When charging is finished, disconnect the power cord (mains lead) from the wall outlet (wall socket), and remove the battery pack from the battery charger.
•Designed for use with compatible Sony batteries.
10