The remaining charge indicator is incorrect.

This phenomenon occurs when you use the camera in an extremely hot or cold location.

A discrepancy arose between the remaining charge indicator and the actual remaining battery charge. Fully discharge the battery pack once, then charge it to correct the indication.

The battery pack is discharged. Insert the charged battery pack (page 10).

The battery pack is dead. Replace it with a new one.

Cannot charge the battery pack.

You cannot charge the battery pack using the AC Adaptor (not supplied). Use the battery charger (supplied) to charge the battery.

Shooting still images/movies

Cannot record images.

Check the free capacity of the internal memory or “Memory Stick Duo” (page 32). If it is full, do one of the following:

Delete unnecessary images (page 18).

Change the “Memory Stick Duo”.

You cannot record images while charging the flash.

When shooting a still image, set the mode dial to a position other than .

Set the mode dial to when shooting movies.

The image size is set to [640(Fine)] when recording movies. Do one of the following:

Set the image size to other than [640(Fine)].

Insert a “Memory Stick PRO Duo”.

Vertical streaks appear when you are shooting a very bright subject.

The smear phenomenon is occurring and white, black, red, purple, or other streaks appear on the image. This phenomenon is not a malfunction.

35