Capresso 464 operating instructions CoffeeTEAM GS glass carafe, Drip Stop / Stop And Serve

Models: 464

1 15
Download 15 pages 49.73 Kb
Page 11
Image 11

CoffeeTEAM GS (glass carafe):

After brewing is finished remove the carafe from the platform. Slowly pour coffee. Return the carafe to the heating platform.

The CoffeeTEAM GS will keep the coffee hot for two hours after brewing. Then the ON/OFF light will turn off, indicating that the heating element is turned off.

To keep coffee hot longer:

First push the BREW button, then push the ON/OFF button. This prevents the machine from grinding again.

10.1 DRIP STOP / STOP AND SERVE

While the coffee is brewing you can remove the carafe to pour a cup or two. The drip stop will close automatically.

To avoid any overflow, replace the carafe within 20 seconds.

CAUTION: The drip stop might not close completely allowing coffee to drip onto the platform. In this case immediately place carafe back into the machine and let all the coffee flow into the carafe.

After brewing is finished, check the GoldTone filter for any clogging and rinse the filter insert to remove any coffee particles from the drip stop (Fig. 5).

10.2 GRINDING AND BREWING LATER ("AUTO")

Coffee maker is plugged in and the time and auto-on time are set.

Beans are in the bean container.

Fill the water tank with the desired amount of water.

Make sure the Filter Insert and GoldTone filter are in place and the GoldTone filter is empty.

Make sure the Filter holder is closed.

Insert the carafe with lid, into the machine.

Make sure the “GRIND/BREW” light is illuminated.

Push the PROG button briefly. The green light turns on and the display shows “AUTO”. At the preprogrammed time, the green light will turn off, the red ON/OFF light will illuminate and the grinding and brewing will start.

Recommendation: If you want your coffee ready by 7:30, set the auto-on time to 7:15.

11. BREWING COFFEE WITHOUT THE GRINDER

You can use your CoffeeTEAM like a regular drip coffee maker with pre-ground coffee (without using the grinder).

Open the water container lid (Fig.1.7) and fill the desired amount of cold water into the water container.

Push the Filter Release button to open and fill ground coffee into the GoldTone filter. Close the Filter Holder.

Insert the carafe with lid into the machine.

Push the “BREW” button. The red “BREW” light illuminates.

Push the ON/OFF button. The red ON/OFF light illuminates and the brewing process starts immediately.

11.1 BREWING PREGROUND COFFEE LATER ("AUTO")

Coffee maker is plugged in and the time, auto-on time are set.

Fill the water tank with the desired amount of water.

Push the Filter Release button to open and fill ground coffee into the GoldTone filter. Close the Filter Holder.

Insert the carafe with lid into the machine.

Push the “BREW” button. The red “BREW” light illuminates.

Push the PROG button briefly. The green light turns on and the display shows “AUTO”. At the preprogrammed time, the green light will turn off, the red ON/OFF light will illuminate and the brewing will start.

11.

Page 11
Image 11
Capresso 464 operating instructions CoffeeTEAM GS glass carafe, Drip Stop / Stop And Serve, Grinding And Brewing Later Auto