Capresso 464 PREPARING THE COFFEETEAM 9.1 CLOCK AND GRINDER SETTINGS, a Setting the Actual Time

Important:

•CoffeeTEAM GS (glass carafe): when brewing, always have the lid in place.

•Let some water brew through the machine without any coffee as follows.

•Plug in machine and make sure the GoldTone filter and filter insert are in place.

•Fill the water tank with approx. 20 oz. of water and place the carafe with lid in the machine.

•Push the BREW button, then the ON/OFF button (Fig. 2). The machine starts processing the water into the carafe.

•After all water has passed through, push the ON/OFF button again to turn off machine.

•Empty carafe

9.PREPARING THE COFFEETEAM

9.1 CLOCK AND GRINDER SETTINGS

Plug in machine. The display shows “0:00” blinking and either the “BREW” or the “GRIND/BREW” light is illuminated (Fig. 2). Please note: You must set the actual time before you can operate the coffee maker.

a) Setting the Actual Time

•The display shows “0:00” blinking

•Push and hold the H button until the actual hour is displayed. The display will also show AM or PM.

•Push and hold the M button until the minutes are displayed. The time is now set.

Please note: You must change the clock when the time changes (Standard time /Daylight Savings time).

b) Setting the Auto-On Time

You can only set the Auto-On Time after the actual time is set.

•Push and hold the PROG button until the display shows AUTO and a random number is blinking.

•Keep the PROG button depressed.

•Push and hold the H, then the M button to set Auto-On time.

•Release the PROG button. The display reverts to the actual time.

c) To change the Auto-On Time

•Push and hold the PROG button until the display shows AUTO. Keep the PROG button depressed.

•Push and hold the H and then the M button to set a new Auto-On time.

•Release the PROG button. The display reverts to the actual time.

d) Checking the Auto-On Time

•Push and hold the PROG button. The display shows the word “AUTO” and the Auto-On time.

•Release the PROG button. The display reverts to the actual time.

e) Activating the Auto-On Time

•Push the PROG button briefly. The display shows “AUTO” and the green Auto-On light illuminates, indicating the Auto-On setting is active. The machine will show the actual time. At the pre- programmed time the machine starts grinding and brewing (or brewing only). For details see chapter 10.2 & 11.1.

f) Grind Volume Setting: the “2-10” button

Please note: the CoffeeTEAM lets you set two different grinder

settings: one for immediate use and one for Auto-On use. For both uses the default setting is “10”.

For immediate use: Push the “2-10” button repeatedly to select from 2, 4, 6, 8, 10.

For Auto-On use: Push and hold the PROG button until the word “AUTO” is displayed. Keep the PROG button depressed and then push the “2-10” button to select from 2, 4, 6, 8, 10.

8.