Important: let the machine cool down for 5 minutes.
•Fill 20 oz. of fresh cold water into the water tank and brew through the machine.
14. Frequently Asked Technical Questions
Q1. There is no coffee coming out of the grinder. It seems as though the coffee is completely clogged inside the grinder. What do I do?
A. Please follow the steps outlined in chapter 12d, page 12.
Q2. Can the grinder run without beans in the bean container? A. Yes.
Q3. Can I have different grind amount settings for the current and the programmed mode?
A. Yes! See chapter 9.1, f.
Q4. How long does the machine keep the grinding and brewing settings?
A.As long as the machine is plugged in. If the machine loses power you have to reset the time and personal settings (see chapter 9).
Q5. How do I know if the display shows the current or the programmed setting?
A.The display always shows the current setting. To view the programmed setting push and hold the PROG button. The display will show “AUTO” and all settings for the
Q6. Beans spilled into the water container. What do I do? A. Unplug the machine, remove the carafe, empty the bean
container (as well as you can), remove the filter holder insert and GoldTone filter, open the water container lid and turn the machine upside down over a sink. After replacing all parts, reset the time and program the machine again, see chapter 9.
15. Frequently Asked Coffee Questions
Q1. How much coffee should I use?
A.The grinder grinds approximately between 7 seconds (setting “2, mild”) and 40 seconds (setting “10, strong”).
See chapter 9.2.
Q2. I want a full pot of coffee at 8:00 AM. What time should I program the grinder to start?
A. Set the timer 15 minutes earlier (in this case at 7:45 AM).
Q3. The grinder makes a loud noise? No coffee is processed. A. A stone blocks the grinder. Please call
13.
