Capresso 465 Initial Preparation, When to replace the cartridge, Grinding and Brewing Coffee NOW

your coffee when using the water filtration system. However, most tap water is treated with chlorine. The water filter cartridge removes up to 82% of the chlorine found in your tap water.

Initial Preparation:

•Open the water container lid and remove the charcoal filter holder.

•Remove the charcoal filter from poly bag.

•Soak the filter in a glass with cold water for a few minutes. This will activate the filter.

•Insert the cartridge into the charcoal filter holder (Fig. 12).

•Place the charcoal filter holder back into the water tank.

•Press the “Filter” button☺ (Fig. 2) to activate the change filter reminder. The symbol will appear.

Please note: The filter reminder only functions when machine is plugged in and time has been set.

When to replace the cartridge:

• After 60 pots of coffee or☺6 weeks after first use, the filter indicator button symbol will blink, indicating it is time to change the filter. Unused cartridges can be stored indefinitely.

•Replacement cartridges are available through your local Capresso dealer or by using the enclosed mail order form or through the website: www.capresso.com.

9.7 GOLD TONE FILTER AND FILTER INSERT

•Push the Filter Release button (Fig. 1.11). The filter holder swings open. The Goldtone filter and the filter insert can be removed.

•Before grinding/brewing coffee always make sure that the GoldTone filter is empty and placed into the filter insert.

CAUTION/ DANGER!

•Never use the coffee maker without the filter insert and GoldTone filter. Extremely hot water can overflow onto the warming plate and counter. If this occurs, turn the machine off and wait until the brewing stops.

•Then push the Filter Release button, add the filter insert and the GoldTone filter and close the filter holder. Place the carafe underneath and continue brewing until the water tank is empty.

9.8MODEL #465: USING THE STAINLESS STEEL CARAFE For best coffee temperature pre-warm the carafe by rinsing it with hot water. Always make sure carafe is completely empty before brewing. Place the lid onto the carafe as shown in Fig. 8 and turn lid clockwise until the pouring release lever is aligned with the handle (Fig. 9). Insert carafe into the machine.

Please note: If you lose the lid, you cannot brew coffee. Use the enclosed mail order form or call 1-800-767-3554 to order a new lid. Please note: Always make sure that the carafe is transported in an upright position. If you turn the carafe on its side or upside down with its lid closed, hot coffee may escape (Fig. 10). Important: Do not try to remove the stainless steel bottom. Do not place the carafe on any hot surfaces since this can loosen the vacuum seal inside the bottom. This can cause the carafe to lose its thermal function. Do not place carafe in dishwasher microwave, oven or stove.

10.GRINDING AND BREWING COFFEE NOW

•Coffee maker is plugged in and the time, auto-on time are set.

•Beans are in the bean container.

•Fill the water tank with the desired amount of water.

•Make sure the filter insert and GoldTone filter are in place and the GoldTone filter is empty.

•Make sure the Filter holder is closed.

•Insert the carafe with lid into the machine. Stainless Steel carafe: make sure the lid is closed (Fig. 9).

•Make sure the “GRIND/BREW“ button is illuminated.

•Push the ON/OFF button (Fig. 2). The red ON/OFF light illuminates. The grinder will start grinding and the ground

10.