Capresso F7 Cleaning the Frother, Programming, Installing and Activating the Clearyl Water Filter

HOTTER MILK? After frothing the milk, use the steaming position (Frother sleeve UP) to increase the milk temperature.

H) Cleaning the Frother

Within 10 min. after last use, place a cup under the frother. Turn the SELECTOR for 5 sec. to the Hot Water symbol. For thorough cleaning see page 15 of the Operating Instructions.

J) Programming

Push and hold the P button until the display shows FILTER -. Turn the DIAL to access the other functions: HARDNESS,

AROMA, TEMP., TIME, UNIT ON, AUTO OFF, CUPS MADE, LANGUAGE, DISPLAY.

Select the function, push the DIAL, turn DIAL to see or select option. Push DIAL to confirm. Push P button to get back to READY. For details see Operating Instructions.

K)Installing and Activating the Clearyl Water Filter

1. Rinse cartridge under running water. Insert cartridge into water tank reception and close the cartridge holder.

2. Fill tank with cold water. Push and hold the P button: FILTER -. Push the DIAL: NO -. Turn DIAL: YES ✔.

3. Push DIAL. INSERT / OPEN TAP. Place a container (20 oz.) under the frother. Turn the SELECTOR to the water symbol. FILTER RINSING.

4. After 90 sec.: CLOSE TAP. Turn the SELECTOR to the cup symbol. HEATING. READY.

The display will remind you when it’s time to replace the cartridge. Please note: When the filter program is activated, the decalcifying program (HARDNESS) is turned off.

Important: Do not let the filter dry out. Filter needs to be submersed in water. See page 16, Operating Instructions.

L)Replacing and Activating the Clearyl Water Filter When display shows CHANGE FILTER / READY

• Remove old filter, rinse new filter under running water and insert (see above).

• Turn machine off. Push and hold the Rinse button until the display shows CHG FILTER / OPEN TAP.

• Place a large container (20 oz.) under the frother and turn the SELECTOR to the water symbol. FILTER RINSING.

• See Chapter K,4 above.

Important: If message CHANGE FILTER / READY does not show up after 3 months, you must replace the filter.

M)Cleaning with Special Tablet

This cleaning cycle removes coffee oils inside the machine. This message will appear after 200 cups of coffee: CLEAN / READY. Takes less than 15 minutes!

Important: Only use the special white round cleaning tablet!

Important: Once started, do not interrupt the program!

1.Fill water tank. Push the RINSE button. EMPTY TRAY. Please note: You must remove the drawer for

20 seconds even if it is empty. Replace complete drawer.