Manual Arming: Lock & Arm
1.Press the 
button on the transmitter.
2.The siren will chirp once and parking lights will flash once indicating that the system is now armed. The vehicle doors will lock upon arming when interfaced with the security system.
System Armed | Door Ajar | Trunk/Hood Ajar |
Ajar Warning:
If the siren sounds 3 chirps, then you have left a door, trunk, or hood lid ajar.
Silent Arming/Disarming
Press the transmitter 
and 
button at the same time to arm or disarm your security system. No chirp sound will be heard. The arm/disarm confirmation will be through the vehicle’s parking lights only.
Shock Sensor Bypass
Press the 
button on the transmitter two times within 3 seconds. This will arm the security system and bypass the shock sensor. The system will chirp one additional time to confirm the sensor Bypass Mode was activated. The sensor bypass feature is programmed to activate for one arming cycle only. The security system will return to normal operation during the next arming cycle.
Hidden Alarm Function
Press the 
button first, within 3 seconds press the 
button to activate the hidden alarm function. The security system will arm, but the siren / horn will be silenced even if the sensor is triggered in the armed status.
Automatic Arming
Manual arming/disarming is controlling your security system via the remote transmitter. This security system is equipped with an optional Automatic Arming feature which allows the security system to arm 30 seconds after the last door is closed. Operation is as follows:
1.Turn the ignition to the “OFF” position and exit the vehicle.
2.After all entrances are closed, the security system LED will flash fast for 30 seconds. If you reopen any Door, Hood, Trunk the security system LED will stop flashing. It will begin flashing again once the vehicle’s entrances are closed.
3.After the
Automatic Arming with Automatic Door Locking (Programmable)
The vehicle doors will automatically lock after the passive arming cycle has been completed.
8
